Baoji Hong Ya Da Nonferrous Metal Materials Co.,Ltd
Call us on:+86-917-3854158   E-mail: hydtitanium@hotmail.com
  • 379855550
Industry knowledge

6AL-4VTitanium Mechanical Properties for AMS4928

Source:

Ti 64 alloy is produced by primary melting using vacuum arc (VAR), electron beam (EB), or plasma arc hearth melting (PAM). Refining is achieved by vacuum arc remelting. Like other titanium alloys, Ti 64 has a modulus of elasticity of 107 Gpa (16.5 x 103 ksi), roughly half that of carbon steels.

6AL-4V Titanium Mechanical Properties for AMS4928

MINIMUM TENSILE VALUES, INCH/POUND UNITS

Nominal Diameter of Distance Between Parallel Sides (Inches)Tensile Strength
       ksi
Yield Strength at
       0.2% Offset
       ksi
Elongation in 4D
       %
       Long.
Elongation
       in 4D
       %
       L.T.
Elongation
       in 4D
       %
       S.T.
Reduction
       of Area
       %
       Long.
Reduction
       of Area
       %
       L.T.
Reduction
       of Area
       %
       S.T.
Up to 2.000, incl13512510102520
Over 2.000 to 4.000, incl130120101010252015
Over 4.000 to 6.000, incl13012010108202015

 

MINIMUM TENSILE VALUES, SI UNITS

Nominal Diameter of Distance Between Parallel Sides (Millimeters)Tensile Strength
       MPa
Yield Strength at
       0.2% Offset
       MPa
Elongation in 4D
       %
       Long.
Elongation
       in 4D
       %
       L.T.
Elongation
       in 4D
       %
       S.T.
Reduction
       of Area
       %
       Long.
Reduction
       of Area
       %
       L.T.
Reduction
       of Area
       %
       S.T.
Up to 50.80, incl93186210102520
Over 50.80 to 101.60, incl896827101010252015
Over 101.60 to 152.40, incl896






Product Categories

Fast Track

Copyright © Baoji Hong Ya Da Nonferrous Metal Materials Co.,Ltd