Baoji Hong Ya Da Nonferrous Metal Materials Co.,Ltd
Call us on:+86-917-3854158   E-mail: hydtitanium@hotmail.com
  • 379855550
Industry knowledge

Medical Grade Titanium-surgical application titanium bar

Source:


Because it is bio-compatible (non-toxic and is not rejected by the body), surgical application titanium bar is used in different medical applications including surgical implements and implants, such as hip balls and sockets (joint replacement) that can stay in place for up to 20 years.  Titanium has the inherent property to osseointegrate, enabling use in dental implants that can remain in place for over 30 years.  This property is also useful for orthopedic implant applications.  Titanium is also used for the surgical instruments used in image-guided surgery, as well as wheelchairs, crutches, and any other products where high strength and low weight are desirable. The unique qualities of titanium also prove to be MRI (Magnetic Resonance Imaging) and CT (Computed Tomography) compatible.

 Medical Grade Titanium-surgical application titanium bar 

Titanium 6AL4V and 6AL4V ELI, alloys made of 6% Aluminum and 4% Vanadium, are the most common types of titanium used in medicine. Because of its harmonizing factor with the human body, these titanium alloys are popularly used in medical procedures, as well as in body piercings. Also known as Gr. 5 and Gr. 23, these are some of the most familiar and readily available types of titanium in the US, with a number of distributors specializing in these specific grades.

 

Ti-6Al-4V and Ti-6Al-4V ELI offer greater fracture-resistance when used in dental implants. The implant procedure begins with the insertion of a titanium screw into the jaw. The screw resembles and acts like the root of the tooth. After an allotted amount of time has passed for the bone to have grown into the medical grade titanium screw, a fake tooth is connected to the implant.


Grades of Titanium-surgical application titanium bar :

Commercial Pure Ti

Grade 5: Ti-6Al-4V

Grade 6: Ti-5Al-2.5Sn

Grade 7: Ti-0.2Pb

Grade 9: Ti-3Al-2.5V

Grade 12: Ti-0.3Mo-0.8Ni

Grade 23: Ti-6Al-4V ELI

Product specifications:

Diameter: 3-350mm

Length: 100-6000mm

Shapes: round, square/flat, hexagonal, rectangle

Surface treatments: polished, peeled, burnish

Grade status: Gr1, Gr2, Gr3, Gr4, Gr5 (Ti-6AL-4V), Gr7, Gr9, Gr12, Gr23

Standards: ASTM B348, ASTM F67, ASTM F136, AMS 4928

Product status: cold rolled (Y), hot rolled (R), annealed (M), solid status (ST)

Features:

Low density and high strength

Exceptional corrosion resistance

Excellent elevated temperature properties

Excellent bearing to cryogenic property

Essentially nonmagnetic

Non-toxic, non-allergenic and fully biocompatible

Good thermal properties

Low modulus of elasticity

Low thermal expansion coefficient

High melting point

Excellent aesthetic qualities

Environment-friendly

Applications:

Electrode materials, fasteners, medical field, surgical implants, chemical industry, structural parts, glasses, aerospace and marine, consumer and architectural, jewelry, nuclear waste storage


Product Categories

Fast Track

  • Feedback
    Baoji Hong Ya Da Nonferrous Metal Materials Co.,Ltd welcomes your comments! Please fill this form to give us feedback or report any problem when experiencing our website.
  • Quick Navigation
  • Contact Us
    Address: Xuguang Industry Zone Baoti New Area Hi-tech District Baoji City Shannxi Province,China 721013
    Tel: +86-917-3854158    
    Fax: +86-917-2730056    
    E-mail: hydtitanium@hotmail.com
Copyright © Baoji Hong Ya Da Nonferrous Metal Materials Co.,Ltd